Electrical Specifications
 |
Detection
System |
Increamental |
| Output Wave |
Square Wave |
Encoder
Resolution |
5,10,12,20,30,40,50,60,100,150,180,200,250
,300,360,400,500,600,720,800,900,1000,1024
,1200,1500,1800,2000,2048,2500 |
| Output Signal |
AB phase, ABZ low phase, AB+Z high phase |
| Output Type |
NPN Voltage, NPN Open collector, Push pull
, Line driver |
| Rated Voltage |
DC8~26V, DC5V fixed |
Current
Consumption |
≦60mA |
| Output Capacity |
Source current:20mA, Residual voltage:0.5V
or less |
Max. Response
Frequency |
10K Hz~100K Hz Max |
Output Phase
Difference |
A,B phase different 90°±45°(T/4±T/8),
Z phase T±T/2 |
Signal
Characteristic |
2us or less |
| Polarity |
Against reverse protection(not with DC5V) |
|
Mechanical Specifications
|
Hollow shaft
Diameter |
6mm,6.35mm,8mm,10mm |
| Max. Shaft Load |
(10~400PPR)Axial: 1kg, Radial :2kg
(over 400PPR)Axial: 0.5kg, Radial :1kg |
| Starting Torque |
30 gf-cm or less |
Max. Speed of
Main Shaft |
6000 rpm |
| Vibration |
10g (10±1,500Hz) |
| Shock |
20g per 11ms |
| Cable |
Φ4.7, 1m long |
| Weight |
≦200g |
|
Environmental Specifications
|
Operating
Temperature |
-10℃~60℃, 95% Rh
(Non-condensing, Non-freezing) |
Storage
Temperature |
-20℃~80℃(Non-condensing, Non-freezing) |
Protection
Degree |
IP50 / IP65 |
|
|
|
|
|
Product Image
|
|
ETEK EH44-8-1024-3-L-H60-AP-S01 EH44-8-1024-3-P-H60-S01 ROTARY ENCODER
ETEK Encoder EH44-10-1200-3-C EH38-8-1024-2-C-B312 ES32-4-100-2-HV-S01 ES38-SF-500-3-C-B361 EH44-10-360-3-C ES38-2000-2-L，ETEK，JX，EH44-8-1024-3-P-H60-S01，EH44-JX-8-600-3-P-AD8，EH44-JX-8-1024-3-P-AD8，
ETEK，JX，EH44-8-1024-3-P-H60-S01，EH44-JX-8-600-3-P-AD8，EH44-JX-8-1024-3-P-AD8 EH44-8-600-3-P-CD105
EH44-8-600-3-P-CD105
ES50-K-360-3-P
ETEK EH38-6-300-2-P ROTARY ENCODER EH38 EH44-10-1200-3-C EH44-10-1000-2-C-B39
ETEK EH44-8 EH44-10 EH44-6 EH44-8-1024-3-p-h60-s01 EH44-8-600-3-P-CD105
ETEK EH44-8 EH44-10 EH44-6 EH44-8-600-3-L-H60-AP-S01
ETEK EH44-8 EH44-10 EH44-6
ETEK，JX，EH44-8-1024-3-P-H60-S01，EH44-JX-8-600-3-P-AD8，EH44-JX-8-1024-3-P-AD8，臺灣JX編碼器
|
|
|
|
