Product Description

TA features:
1. Fully digital ─ with R S 4 8 5 communication function, digital function setting, running display, error detection and protection
2. Phase sequence automatic tracking-when the phase is under-phase, you can choose to stop the output or automatically switch to single-phase output, and both have the A L A R M function.
3. Six groups of S C R three-phase positive and negative full-wave control-output without DC component, suitable for inductive and resistive loads
4. Digital setting ─ can be set without any hardware changes-input command type, response speed, maximum and minimum voltage,
Maximum current limit, operating parameters, alarm A L A R M function
5. Digital display-can display the temperature controller input signal size, output voltage percentage, R, S, T each phase current, heat sink temperature,
Operating parameter setting value, M O D B U S value
6. Debugging and protection-power supply phase loss, F U S E disconnection, load disconnection, load imbalance, SC R breakdown, load overload,
The heat sink is overheated, and the thermostat signal type is detected incorrectly.
7. Short-circuit protection-built-in CT and high-speed short-circuit protection circuit, this model can be set to constant current or limited voltage and current function, and
All have short-circuit protection function, and the short-circuit reaction time is less than 0.5 m s.

Product Image